What’s the BPi-M2+
Banana Pi BPi-M2+ is the open source hardware platform,Banana Pi BPi-M2+ is an quad core version of Banana Pi,it support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm.
Banana Pi BPi-M2+ series run Android,Debian linux,Ubuntu linux, Raspberry Pi image and others image. Banana Pi PBi-M2 hardware: 1Ghz ARM7 quad-core processor, 1GB DDR3 SDRAM, 8G eMMC flash on board,and SDIO wifi module on board.
Banana Pi BPi-M2+ with Gigabit ethernet port, It can run with Android 4.4 smoothly. it can easily run with the game it support 1080P high definition video output and 4K support, the GPIO compatible with Raspberry Pi B+ and can support raspbian Image.
Note: Banana Pi BPi-M2+ not support sata port, so you need use USB for hardisk.
For cost down version ,we may remove 8G eMMC and on board wifi module. so ,everyone can free DIY on this board.
Hardware Specfication:
CPU | H3 Quad-core Cortex-A7 H.265/HEVC 4K |
GPU | Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0 |
Memory (SDRAM) | 1GB DDR3 (shared with GPU) |
Onboard Storage | TF card (Max. 64GB) / MMC card slot,up to 2T on 2.5 SATA disk, 8GB EMMC Flash |
Onboard Network | 10/100/1000M Ethernet RJ45 |
Onboard WIFI | SDIO AP6212(option AP6181、AP6335) |
Video Input | A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL,3 Supports SM pixel camera sensor ,4 Supports video capture solution up to 1080p@30fps |
Video Outputs | Supports HDMI output with HDCP,Supports HDMI CEC, Supports HDMI 30 function,Integrated CVBS, Supports simultaneous output of HDMI and CVBS |
Audio Output | HDMI |
Power Source | DC input can supply power, but USB OTG input don’t supply power |
USB 2.0 Ports | two USB 2.0 HOST, one USB 2.0 OTG |
Buttons | Power Button, Recovery Button, Uboot Button |
Low-level peripherals | 40 Pins Header,compatible with Raspberry Pi B+ |
uart GPIO(1×3) pin | UART, ground |
LED | Power led & Status led |
IR | IR input on board |
Supported OS | Android, Ubuntu, Debian, Rasberry Pi Image |
Product size | 65mm × 65mm |
Weight | 48g |