What’s the BPi-M2+

Banana Pi BPi-M2+ is the open source hardware platform,Banana Pi BPi-M2+ is an quad core version of Banana Pi,it support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm.

Banana Pi BPi-M2+ series run Android,Debian linux,Ubuntu linux, Raspberry Pi image and others image. Banana Pi PBi-M2 hardware: 1Ghz ARM7 quad-core processor, 1GB DDR3 SDRAM, 8G eMMC flash on board,and SDIO wifi module on board.

Banana Pi BPi-M2+ with Gigabit ethernet port, It can run with Android 4.4 smoothly. it can easily run with the game it support 1080P high definition video output and 4K support, the GPIO compatible with Raspberry Pi B+ and can support raspbian Image.

Note: Banana Pi BPi-M2+ not support sata port, so you need use USB for hardisk.

For cost down version ,we may remove 8G eMMC and on board wifi module. so ,everyone can free DIY on this board.

Hardware Specfication:

CPU H3 Quad-core Cortex-A7 H.265/HEVC 4K
GPU Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0
Memory (SDRAM) 1GB DDR3 (shared with GPU)
Onboard Storage TF card (Max. 64GB) / MMC card slot,up to 2T on 2.5 SATA disk, 8GB EMMC Flash
Onboard Network 10/100/1000M Ethernet RJ45
Onboard WIFI SDIO AP6212(option AP6181、AP6335)
Video Input A CSI input connector Camera:1 Supports 8-bit YUV422 CMOS sensor interface,2 Supports CCIR656 protocol for NTSC and PAL,3 Supports SM pixel camera sensor ,4 Supports video capture solution up to 1080p@30fps
Video Outputs Supports HDMI output with HDCP,Supports HDMI CEC, Supports HDMI 30 function,Integrated CVBS, Supports simultaneous output of HDMI and CVBS
Audio Output HDMI
Power Source DC input can supply power, but USB OTG input don’t supply power
USB 2.0 Ports two USB 2.0 HOST, one USB 2.0 OTG
Buttons Power Button, Recovery Button, Uboot Button
Low-level peripherals 40 Pins Header,compatible with Raspberry Pi B+
uart GPIO(1×3) pin UART, ground
LED Power led & Status led
IR IR input on board
Supported OS Android, Ubuntu, Debian, Rasberry Pi Image
Product size 65mm × 65mm
Weight 48g